Ambulances

Protection and decorative profiles in the Ambulances production

The production of ambulances requires the modification from a serial OEM to a rescue vehicle, with installation of all the medical equipment and the sanitary furnishing. 

All these materials must be resistant to wear and accidental impact due to the handling of rescued patients.

 

Combicar designs and manufactures several PVC and EPDM profiles used by ambulances manufacturers:

- protection profiles, like wheel arches extensions, side and bumpers protection, gaskets

- decorative profiles, like interior finishing and LED holding profiles

- technical profiles, like anti-slip, drain rain.

 

 

Find the right product for your application among the Combicar profiles in the catalog suggested below, or request a fully customized design profile.                            CONTACT US on the phone +39 0523 945108 or by email [email protected]

1 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ INTERIOR FINISHING

  Interior finishes

- Profiles with L, T, flat section

- used to cover flanges or joint lines between panels

- coupled with double-sided adhesive tape for easy assembly

- positionable with adhesive/silicone internal layer

2 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ INTERIOR PROTECTION

  Protection profiles for internal use  

- Profiles designed to protect internal parts from accidental impact against luggages during passengers embarquement

- mounting guaranteed by high performance adhesives or by mechanical fixing presetting

- available in various designs to match different types of joints or supports

- possibility to cut to size, to adapt to bus dimension

3 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ DRAIN RAIN

  Drain Rain

- PVC profiles with section designed to perform the drip function

- positioned above the windows and doors they pipe the water and drain it to dedicated points, preventing it from being unloaded inside the ambulance

- available in various sections in black, gray, or white colors, can be made on customized design

- coupled with double-sided adhesive tape, have high strength and avoid long fastening operations (no holes needed)

- Welded with aluminium foil between PVC and high-seal adhesive

4 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ ANTISLIP

  Antislip

- Soft PVC profiles that can be positioned on flat, angular or rounded platforms to facilitate grip and prevent slipping

- in addition to the antislip function, the materials used also allow complete protection of steps and edges

- coupled with aluminum and double-sided adhesive tape to achieve an easy and long-lasting assembly

5 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ WHEEL ARCHES

  Wheel arches extensions

- Universal wheel arches moldings easily conformable and adaptable to all types of mudguards

- protect the bus bodywork avoiding damage caused by accidental impacts and materials raised by the wheels’ rotation

- also provide a pleasant decorative design

- extremely robust plastic material, resistant to the most extreme environmental conditions

6 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ PROTECTION

  Protection profiles  

- Profiles designed to protect sides and bumpers from accidental impact or sliding against vehicles/barriers

- available in various designs to match different types of joints or supports

- cut to size, some profiles are equipped with junction or closing terminals

- provide also a pleasant decoration

7 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ EDGE PROTECTIONS

  Edge protections

- PVC profiles designed to provide a soft protection of the door’s edges, other openings or cut plates

- provide at the same time a pleasant decoration

- complete with adhesive or butyl sealant applied inside the profile to facilitate positioning and / or sealing

8 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ GASKETS

  Gaskets

- Linear gaskets applicable on various surfaces in contact with each other, used for doors, hatches, windows

- Produced in co-extruded PVC to obtain an external soft part welded with a semi-rigid base on which the adhesive is positioned

- High quality of the materials used, to ensure long life and excellent resistance to different weather conditions

- Soft part made of Etilgum, a modified PVC that maintains elasticity at very low temperatures

9 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ LED HOLDING

  LED holding profiles

- Section designed with ducts to house the LED strips, used to illuminate the vehicle's interior

- flexible PVC to allow application on curved surfaces

- double-sided adhesive tape makes assembly easier

- section designed also for the electric cables housing

- four sections of various colors, terminals available

 

Combicar S.r.l.

Via Galileo Galilei, 116, 29010 Alseno (PC)

Tel. +39 0523 945108 - Fax +39 0523 949022
E-mail:

P.IVA 00760170332 | Capitale Sociale 100.000€
Iscrizione al REA di Piacenza al n° PC107022

Privacy