Isothermal

Protection and decorative profiles in the Isothermal Vehicles production

The production of frigo vehicles involves the assembly of the floor, walls and roof of the refrigerated cabin on the vehicle frame, followed by the internal furnishings, accessories and equipment mounting.

All these materials must be resistant to wear and accidental impact due to the handling of the refrigerated food in and out the vehicle.

 

Combicar designs and manufactures several PVC and EPDM profiles used by refrigerated vehicles manufacturers:

- protection profiles, like wheel arches extensions, body side mouldings, edge protections, rear protection, gaskets

- decorative profiles, like vehicles' interior and external finishing, LED holding profiles

- technical profiles, like anti-slip, drain rain, co-extruded profiles

  

Find the right product for your application among the Combicar profiles in the catalog suggested below, or request a fully customized design profile.                             CONTACT US on the phone +39 0523 945108 or by email info@combicar.it

1 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ LED HOLDING

  LED holding profiles

- Section designed with ducts to house the LED strips, used to illuminate the vehicle's interior

- flexible PVC to allow application on curved surfaces

- double-sided adhesive tape makes assembly easier

- section designed also for the electric cables housing

- four sections of various colors, terminals available.

2 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ RIGID PROFILES

❷ Rigid profiles

- L or C section profiles made of rigid PVC with high Shore D hardness

- designed according to the customer's requests to meet the dimensional and functional needs required by the application

- keeping the structural capacities unchanged, they are also used as joints between the walls and the roof

- profiles produced with a shockproof, anti-aging, UV rays resistant special PVC.

3 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ PROTECTION

❸ Protection profiles

- Protective PVC profiles designed to be applied at the point of contact between the side walls and the door handles

- Mounting performed by pre-positioned adhesives or by mechanical fixings

- Available in various sections with different finishes that provides, in addition to the protective function, also a pleasant decoration.

4 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ DRAIN RAIN

❹  Drain Rain

- PVC profiles with section designed to perform the drip function

- positioned above the windows and doors they pipe the water and drain it to dedicated points, preventing it from being unloaded inside the caravan

- available in various sections in black, gray, or white colors, can be made on customized design

- coupled with double-sided adhesive tape, have high strength and avoid long fastening operations (no holes needed)

- Welded with aluminium foil between PVC and high-seal adhesive

5 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ ANTISLIP

❺  Antislip

- Soft PVC profiles that can be positioned on flat, angular or rounded platforms to facilitate grip and prevent slipping

- in addition to the antislip function, the materials used also allow complete protection of steps and edges

- coupled with aluminum and double-sided adhesive tape to achieve an easy and long-lasting assembly

6 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ INTERIOR FINISHES

  Interior finishes

- Profiles with L, T, flat section

- used to cover flanges or joint lines between panels

- coupled with double-sided adhesive tape for easy assembly

- positionable with adhesives/silicones internal layer

 

7 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ CO-EXTRUDED

❼ Co-extruded profiles

- co-extruded profiles with complex section (H-shaped or similar) which have a rigid and a soft part

- excellent resistance between the rigid and the soft part

- always designed according to the customer's requirements to perfectly meet the needs of the specific application

8 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ REAR PROTECTION

❽ Rear protection moldings

- PVC moldings used to protect the rear of the vehicle from accidental impacts against other surfaces during loading and unloading operations

- coupled with aluminum foil welded on PVC and pre-positioned adhesive with very high seal, in order to guarantee the seal outdoors and resistance to different climatic conditions and to impacts

- profiles of various sections already available, can be cut to perfectly adapt to the size of the vehicle

- junction or finishing terminals available at breakpoints

9 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ EDGE PROTECTIONS

  Edge protections

- PVC profiles designed to provide a soft protection of the door’s edges, other openings or cut plates

- provide at the same time a pleasant decoration

- complete with adhesive or butyl sealant applied inside the profile to facilitate positioning and / or sealing

10 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ SIDE MOULDING

  Body Side mouldings  

- Profiles designed to protect the body sides from accidental impact or sliding against vehicles/barriers

- available in various designs to match different types of joints or supports

- cut to size, some profiles are equipped with junction or closing terminals

- provide also a pleasant decoration

11 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ GASKETS

11  Gaskets

- Linear gaskets applicable on various surfaces in contact with each other, used for doors, hatches, windows

- Produced in co-extruded PVC to obtain an external soft part welded with a semi-rigid base on which the adhesive is positioned

- High quality of the materials used, to ensure long life and excellent resistance to different weather conditions

- Soft part made of Etilgum, a modified PVC that maintains elasticity at very low temperatures

12 ▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫▫ WHEEL ARCHES

12  Wheel arches extensions

- Universal wheel arches moldings easily conformable and adaptable to all types of mudguards

- protect the bus bodywork avoiding damage caused by accidental impacts and materials raised by the wheels’ rotation

- also provide a pleasant decorative design

- extremely robust plastic material, resistant to the most extreme environmental conditions

Combicar S.r.l.

Via Galileo Galilei, 116, 29010 Alseno (PC)

Tel. +39 0523 945108 - Fax +39 0523 949022
E-mail:

P.IVA 00760170332 | Capitale Sociale 100.000€
Iscrizione al REA di Piacenza al n° PC107022

Privacy